Aikace-aikace da bambanci na ƙwanƙwasa ƙwanƙwasa kai, haɓakar ƙwayayen rivet, ƙwayayen rivet

A fagen sarrafa karfen takarda, fasahar riveting, a matsayin muhimmiyar hanyar haɗin gwiwa, ana amfani da ita sosai wajen kera samfuran ƙarfe daban-daban. Daga cikin su, ƙwanƙwasa kai, haɓakar haɓakawa, da ƙwanƙwasa, a matsayin wakilai na fasaha na fasaha, kowannensu yana samun haɗin gwiwa mai ƙarfi tsakanin sassa ta hanyarsa ta musamman, yana ba da garanti mai ƙarfi ga kwanciyar hankali da dorewa na samfurin.

Matsakaicin Clinching Kai: Madaidaicin Matsayi, Haɗin Tsage

Kai Clinching Standoffs, a matsayin wani muhimmin aikace-aikace nau'i na kai rivet fasahar, plastically lalata tushe abu a karkashin aikin na waje matsa lamba, sa'an nan kuma tam sanya shi a cikin wani prefabricated tsagi na musamman da aka ƙera don samar da ingantaccen haɗi tare da wani bangaren. Wannan hanyar haɗin kai ba kawai tana buƙatar cewa taurin sassan da aka ƙera ya fi na kayan tushe ba, amma kuma yana jaddada halaye biyu na daidaitaccen matsayi da haɗin gwiwa. A kan ƙananan ƙarfe na ƙarfe na yau da kullun, faranti na alloy na aluminum, faranti na jan karfe da sauran kayan, tsayawar kai-da-kai na iya samun ingantacciyar haɗin kai da kwanciyar hankali. Duk da haka, lokacin da aka fuskanci kayan aiki tare da taurin mafi girma irin su bakin karfe da babban carbon karfe, al'adun gargajiya na cin gashin kansu sau da yawa suna ganin ba za su iya jimre wa halin da ake ciki ba, kuma ana buƙatar nau'i mai ƙarfi na musamman, wanda ba kawai yana ƙara yawan farashi ba, amma yana iya fuskantar matsaloli yayin aiwatar da crimping, yana shafar ingancin haɗin kai. Sabili da haka, lokacin zayyana sassan ƙarfe na takarda, ya zama dole don zaɓar a hankali ko don amfani da tsayawar kai tsaye dangane da kaddarorin kayan.

Bayani dalla-dalla: #4 zuwa #10 da M3 zuwa M5.

Kwayoyi masu cin gashin kansu: mai sauƙi, inganci, da amfani da yawa

Mai kama da tashe-tashen hankulan kai-tsaye, ƙwaya masu ɗaure kai suma suna amfani da matsa lamba na waje don haifar da nakasar filastik na kayan tushe don cimma manufar haɗin gwiwa. A crimping tsari ne da ilhama da kuma bayyananne, da kuma aiki ne mai sauki da kuma m, don haka shi ne yadu amfani a dangane daban-daban sheet karfe sassa. Duk da haka, kamar tashe-tashen hankulan kai tsaye, aikace-aikacen ƙwanƙwasa kai tsaye akan kayan daɗaɗɗen ƙarfe irin su bakin karfe kuma yana ƙarƙashin wasu ƙuntatawa, kuma ya kamata a ba da kulawa ta musamman ga kayan daidaitawa da sarrafa tsari.

Ana iya shigar da shi cikin sauri da dacewa tare da daidaitattun kayan aikin, kuma yana da kyaun juriya da juriya. Ana amfani dashi don faranti sama da 0.8mm. Bayanin zaren sune: #2 zuwa 1/2", M2 zuwa M10.

Fadada Kwayoyin Rivet: Sauƙi kuma Mai daidaitawa

Fadada rivet goroyi amfani da wata ka'idar aiki ta daban, wato, yayin aikin riveting, kayan ɓangaren goro yana lalacewa ta hanyar filastik ta hanyar ƙarfin waje don samar da madaidaicin dacewa tare da kayan tushe, don haka samun haɗin gwiwa. Wannan hanya tana da tsari mai sauƙi mai sauƙi da matsakaicin ƙarfin haɗin kai, kuma ya dace musamman ga al'amuran inda akwai ƙuntatawa akan tsayin maɗauran kuma ƙarfin ba shi da girma. Tare da halayensa masu sassauƙa da canzawa, ƙwayoyin rivet na haɓaka suna saduwa da buƙatun haɗin kai a lokuta daban-daban kuma sun zama nau'in fasaha mai mahimmanci na riveting.

Rivet Kwayoyi: Space Limited, Magani na Musamman

Rivet kwayoyian tsara su don takamaiman wuraren shigarwa. Suna amfani da tashin hankali na waje don haifar da nakasar filastik na sassan da aka ƙera a wurare na musamman da aka ƙera, ta yadda za a ɗaure maɗaurin don cimma haɗin gwiwa. Ana amfani da wannan hanya mafi yawa a cikin yanayi inda sararin shigarwa ya iyakance kuma ba za a iya amfani da kayan aikin rive gaba ɗaya ba, kamar rufaffiyar haɗin cikin bututu. Kwayoyin Rivet suna haɗuwa tare da bindigogi na musamman don aiki, wanda ba kawai inganta ingantaccen aiki ba, amma yana tabbatar da aminci da kwanciyar hankali na haɗin gwiwa.

A taƙaice, ƙwaƙƙwaran kai Standoffs, ƙwaya mai ɗaure kai, ƙwaya mai faɗaɗawa, da ƙwanƙarar ƙwaya kowanne yana taka muhimmiyar rawa a fagen sarrafa ƙarfen takarda ta hanyoyinsu na musamman. Lokacin zabar wace hanyar riveting don amfani, abubuwa kamar kaddarorin kayan aiki, buƙatun haɗi, da yanayin shigarwa dole ne a yi la'akari da su gabaɗaya don tabbatar da ingancin haɗin gwiwa da tasirin amfani. Tare da ci gaba da ci gaban fasaha da ci gaba da inganta matakai, na yi imanin waɗannan fasahohin da za su nuna fara'a na musamman a wasu fagage.

FASTOyana mai da hankali kan samar da ingantattun kayan aikin kamar su Screws, Bolts, Nuts, Washers, Rivets, Thread Rods, Nails, Anchors and Tools, da dai sauransu.

• WhatsAppBayani:+8619829729659
• Imel: fastom@vip.163.com