Yin amfani da fasteners ya kamata ya kula da cikakkun bayanai, aikin yana da mahimmanci, kulawa na yau da kullum shine mabuɗin, don tabbatar da aiki na yau da kullum na inji. Domin hana wasu matsaloli tare da fasteners, dole ne mu kula da wadannan key maki lokacin gudanar da kullum kiyaye fasteners.
1.Gwargwadon gurbacewar ruwa.
Ana bukatar a tsaftace kayan datti da silicate bayan an gama kashewa, sannan a wanke su, don haka a wanke su da kyau don hana ragowar.
2.The fastener stacking ne m.
Bayan zafin jiki, mai ɗaurawa zai nuna alamun canza launi, kuma za'a iya samun ragowar mai bayan jiƙa a cikin ether, wanda ke nuna cewa saman na'urar ba ta da tsabta. Bayan an yi nazari, ba a lissafta na'urar yadda ya kamata a lokacin dumama, wanda ke haifar da ɗan ɗanɗano oxidation na fasteners a cikin man da ke kashewa.
3.Sauran saman.
Akwai ragowar fararen fata a kan manyan kusoshi masu ƙarfi, waɗanda aka bincika ta kayan kida kuma an tabbatar da su azaman phosphate. Wannan abin da ya faru ya faru ne saboda ba a tsabtace mai wanke acid ba kuma ba a bincika tankin kurkura sosai ba.
4.Alkali kuna.
Babban ƙarfi dunƙule quenching sharar gida zafi baƙar fata yana da uniform, lebur mai baƙar fata surface. Konewar alkali ne ke haddasa shi. Saboda haka, karfe fasteners ba zai iya cire surface alkaline a cikin quenching man fetur, wanda ya sa surface konewa a high zafin jiki, da kuma kara lalacewa a lokacin tempering. Ana ba da shawarar sosai don tsaftacewa da wanke kayan ɗamara kafin magani mai zafi, don cire gaba ɗaya ragowar alkaline wanda ke haifar da ƙonewa ga masu haɗawa.
5.Kurkure mara kyau.
Don manyan ƙayyadaddun bayanai, ana amfani da kayan ɗamara sau da yawa ta hanyar quenching tare da maganin ruwa na polymer, kuma ana tsaftace su kuma an wanke su da injin tsaftacewa na alkaline kafin a kashe su, kuma masu ɗaure sun yi tsatsa a ciki bayan sun ƙare. Don haka sau da yawa musanya ruwan kurkura, don tabbatar da cewa fasteners ba za su yi tsatsa.
6. Yawan tsatsa.
Maɗaukaki masu ƙarfi sukan ga wasu ratsan baƙar fata, wannan baƙaƙen ratsi don gurɓataccen ƙasa, ga busasshen man da ke kashewa, shine juyin halittar iskar gas a cikin aikin kashewa. Domin yana kashe mai fiye da kima tsufa, ana ba da shawarar ƙara sabon mai.
Lokacin aikawa: Agusta-19-2022